Up To 20% Off! Code
Online Only. Exclusions apply. Ends 12/8
This item is currently not at your store, but is available for order. Please call store to verify the specific location and delivery details for this item. Note that additional shipping charges may be required.
The ODYSSEY Extreme Series Battery provides both superior starting power and substantial deep-cycle performance. With two times the overall power and triple the service life of other batteries, ODYSSEY Extreme Batteries provide ample power for engine-cranking pulses (more than 2250 amps for 5 seconds), even at very low temperatures. They are crafted to take on 400 charge-discharge cycles to 80% depth of discharge.
These automotive batteries are quality built, start to finish, and it shows. Where most companies use lead alloy in the construction of their flat plates, ODYSSEY uses 99% pure lead. Because lead plates can be thinner, a higher number of plates fit in the battery housing. The increased plate surface area means two times the power of conventional batteries.
The dry cell AGM (Absorbed Glass Mat) system contains the acid, allowing the vehicle battery to be mounted safely in different positions. ODYSSEY batteries are manufactured by EnerSys Energy Products Inc., a worldwide leader in stored energy solutions. Your purchase is backed by a 3-Year Warranty.
Odyssey absorbed glass mat batteries are engineered with thin plate pure lead technology. The flat plates are constructed of 99% pure lead - not lead alloy, so they can be made thinner in order for more to fit in the battery. The additional plates result in 15% more surface area for more power. This advanced manufacturing design delivers increased reliability and long life.
Negative Terminal Location | Side Right |
Reserve Capacity | 48 min |
Battery Terminal Type | SAE |
BCI Group Size | BCI No. NA |
Sub Brand | Extreme Series AGM |
VMRS Code | 032001001 |
Cranking Amperage | 480 A |
Battery Type | Absorbed Glass Mat (AGM) |
Quality Level | Best |
Weight | 23.8 lbs |
Brand | Odyssey |
Cold Cranking Amps | 330 CCA |
Contents | (1) Battery Assembly |
Length | 6.64 in |
Positive Terminal Location | Side Left |
Amp Hour | 28 AH |
DIN Code | N/A |
Voltage | 12 V |
Height | 4.77 in |
SDS Required | Yes |
Width | 7.05 in |
© Copyright 2024. National Automotive Parts Association. All Rights Reserved