Product Details
- With the help of the B&W Trailer Hitch Reducer Sleeve, you can easily reduce the size of your receiver hitch
- Reduces a 2.5-inch hitch to a 2-inch or a 3-inch hitch into a 2.5-inch
- There is a range of truck hole depths possible, depending on the rotating component
- It is simple to remove by simply inserting a screwdriver into the notch
- Stops in place when holes are flush and aligned
- Protected with a Limited Lifetime Warranty
You have a receiver hitch, but the attachment you wish to utilize comes designed for a smaller size. No problem! By reducing the size of your hitch with the help of the B&W Trailer Hitch Reducer Sleeve, you will have access to a wide variety of hitch-mounted accessories previously unavailable to you.
Your B&W Reducer Sleeve can simply double the usefulness of your trailer hitch by reducing the diameter of your hitch from 2.5 inches to 2 inches or from 3 inches to 2.5 inches. In addition to this, it is simple to use. Just slide the component into place, and once the holes are in the correct position, it will stop moving on its own. Turning the component 90 degrees is all that is required to make the necessary adjustments for the various truck hole depths.
The removal is simple as well. It can be removed quickly and easily with a screwdriver or any suitable instrument, thanks to a cutout notch, for your convenience. NAPA proudly sells the B&W Trailer Hitch Reducer Sleeve, protected with a Limited Lifetime Warranty.
