NAPA

Curt Front Mount Receiver Hitch

3314

Product Details

  • Carry cargo, push a snowplow, launch your watercraft and more with any 2-inch receiver hooked to the versatile Curt Front Mount Receiver Hitch
  • State-of-the-art welds deliver exceptional strength with up to 5,000 pounds GTW / 500 pounds TW
  • Rustproof inside and out thanks to comprehensive seal and dense EverGloss powder-coat finish
  • Custom crafted for your exact make and model, making installation a snap with the provided hardware
  • Backed by a Limited Lifetime Warranty

Strap on a winch, spare tire, snowplow, cargo holder and more with the adaptable, multi-use Curt Front Mount Receiver Hitch. Utilizing any 2-inch receiver, your new aftermarket Curt Front Hitch is perfect for towing, hauling, pushing and pulling. It is rated for up to 5,000 pounds of Gross Trailer Weight and 500 pounds of Tongue Weight.

This built-tough Front Mount Receiver Hitch is engineered for a lifetime of dependable, hard work. Each meticulous robotic weld creates a waterproof seal to block out moisture, for a rustproof fabrication inside and out. Your new hitch is coated with a robust layer of black EverGloss finish. This baked-on powder coating not only prevents corrosion but it's also tough on scrapes and scratches.

The open-back design allows for quick cleaning. NAPA AUTO PARTS is proud to offer the Curt Front Mount Receiver Hitch with a Limited Lifetime Warranty.

Curt Front Mount Receiver Hitch Customer Reviews

Overall:
Performance:
Quality:
Appearance:

Overall Rating:

4.7 of 5

Average Install Time:

30 - 60 minutes
who drives a Chevy Silverado
Overall:
Performance:
Quality:
Appearance:

Went on perfect...no slop. Great hitch receiver and at a very reasonable price. Highly recommend purchasing one to carry an extra toy on your camping trip

Install Time: 1 - 2 hours

who drives a GMC Sierra
Overall:
Performance:
Quality:
Appearance:

Hitch looks good, but NO holes for chain tie down. No happy

Install Time: Under 30 minutes

who drives a Nissan Frontier
Overall:
Performance:
Quality:
Appearance:

Hitch installation went ok other than the bolts could have been a 1/4 inch longer that were supplied with the hitch.

Install Time: 1 - 2 hours

who drives a Ford F150
Overall:
Performance:
Quality:
Appearance:

Used Curt mounts before. Very good quality and the mount fit perfectly except I had to modify some of the fairing on my F150.

Install Time: More than 2 hours


Overall:
Performance:
Quality:
Appearance:

A new bolt-on favorite! I'm not sure why I've never installed a front hitch on any of my pick-ups before, but from here forward one goes on with each future truck. If for no other reason than to use a hitch step to do routine service under the hood. Add to that its use to add a cargo carrier, a quick and clean mounting point for a winch (that doesn't involve me changing the bumper), a mounting point for a front out-rigger when I need to carry full length joints of pipe, or decking material, fence rail of whatever, a mounting point for a generator platform, a mounting point for a bike rack, wheel chair, the use potentials are many! I might even build a carrier to hold my tree cutting gear for when I'm out on the ranch cutting firewood.

Install Time: Under 30 minutes

who drives a Nissan Frontier
Overall:
Performance:
Quality:
Appearance:

High quality, durable construction. Fitment however, was not bolt-on. After troubles cleaning out weldnuts and removing rusty hardware (unrelated to product), I found that the drilled holes do not match up with the factory weld nuts. If I hadn't tried to drill out the holes to make them bigger, I would probably have returned it. Even after drilling out the holes, I was only able to get three of the four bolts on. Props to curt for the construction and durability, as the steel was extremely hard to drill through and required a metal fabrication drill bit to even make some progress. I have it on now and will likely pay someone to weld it directly to the frame, as I don't trust the weld nuts. Besides the fitment issues, an excellent product, just be prepared to return the item or expand the existing holes if you get a defect like I did.

Install Time: More than 2 hours

who drives a Ford F350
Overall:
Performance:
Quality:
Appearance:

Very satisfied with product. My Ford F-350 has a ranch hand bush guard had to notch plates to get nuts to tighten took about 2 1/2 hours but I would recommend it highly

Install Time: 1 - 2 hours

who drives a Dodge Ram 2500
Overall:
Performance:
Quality:
Appearance:

Great build. The problem I encountered was I have a ranch hand push bumper that uses the same holes. I had to take a cutting torch to notch out the hitch to get it to fit. Other than that it is a great product.

Install Time: More than 2 hours

who drives a GMC Sierra
Overall:
Performance:
Quality:
Appearance:

The receiver hitch arrived quickly and was exactly what we ordered. We needed a front hitch for a bike rack when pulling our bumper pull camper. We have other items on our trailer bumper so there isn't room. This hitch looks good and fits perfectly.

Install Time: 30 - 60 minutes

who drives a Ford F150
Overall:
Performance:
Quality:
Appearance:

as advertised - no drilling so it went very smoothly

Install Time: 1 - 2 hours