Cyber Week: 20% Off $125+ Use Code: CYBER 12/1-12/3. *Online Only. Exclusions apply.
text.skipToNavigation
NAPA Adaptive One Brake Caliper Single Piston Floating
NAPA Adaptive One Brake Caliper Single Piston Floating
Part #:
ADC 1734XB
Line:
Adaptive One Brake Calipers
EMAIL TO YOUR FRIEND
Features & Benefits
Warranty:
Standard : Limited Lifetime-See Manufacturers Written Policy
Download
Download
Adaptive One brake calipers offer a durable, proprietary coating, which provides protection against corrosion by preventing elements like salt, snow and water from contacting the caliper’s housing and included brackets.
Every Adaptive One brake caliper is remanufactured under the highest quality standards to meet or exceed the specifications required by the original design and tested during the assembly process for leaks, free moving pistons and smooth bracket sliding.
- These remanufactured brake calipers offer everything needed for installation: banjo bolts with new copper crush washers, cable mounting brackets, levers, springs, scrape sensors and pre-lubed components with high-temperature synthetic grease (where applicable).
- E-COATING : Adaptive One’s electrodeposition coating ensures complete protection for both cast iron and aluminum calipers and their critical surfaces
- SLIDES : Slider pins come pre-greased, ensuring proper caliper movement and brake system stability
- FRICTION READY : Indicates that the caliper has all the hardware and components except the brake pads
- MOUNTING BRACKET : All calipers come with the mounting bracket 100% of the time where O.E. designed
- MOUNTING BRACKET THREADS : Chased and inspected
- never worry about cross threading
- PIN BOOTS : New pin boots reduce the chance that moisture and contaminates will cause corrosion, which can affect caliper guide bolts and slide pins
- RUBBER COMPONENTS : All rubber components are 100% replaced, ensuring brakes perform at an optimum level
- BRAKE INLET : Banjo bolts and copper crush washers provided (where applicable) to ensure proper seat on the brake inlet and caliper housing
- PHENOLIC PISTONS : OE specifications matched to ensure proper heat dissipation ** Steel not used as Phenolic substitute
- BLEEDER SCREW : New bleeder screws are used to ensure an airtight seal
Specifications
| Pads Included | No |
| Pad Wear Sensor Included | No |
| Caliper Color | Black |
| Caliper Type | Floating |
| Mounting Hardware Included | No |
| Sub Brand | Adaptive One |
| VMRS Code | 013-017-002 |
| Inlet Type | Banjo Bolt |
| Brand | NAPA |
| Caliper Piston Material | Steel |
| Mounting Bracket Included | Yes |
| Contents | Includes Brake Pad Installation Hardware w/ Banjo Bolt & Copper Crush Washers - Where Applicable |
| Inlet Thread Size | M10-1.0 |
| Rust Resistant Coating | Yes |
| Contains VOCs | No |
| Bleeder Thread Size | M10-1.0 |
| SDS Required | No |
| Caliper Slides Included | Yes |
| Finish | Black Coated |
| Casting Material | Cast Iron |
| Piston Quantity | Single Piston |
