text.skipToNavigation
NAPA Adaptive One Brake Caliper Dual Piston Floating Remanufactured
NAPA Adaptive One Brake Caliper Dual Piston Floating Remanufactured
Part #:
ADC 2764XA
Line:
Adaptive One Brake Calipers
EMAIL TO YOUR FRIEND
Features & Benefits
Warranty:
Standard : Limited Lifetime-See Manufacturers Written Policy
Download
Download
WARRANTY INFORMATION
Warranty Available for Download |
Warranty
|
Adaptive One Brake Calipers Offer a Durable, Proprietary Coating, Which Provides Protection Against Corrosion by Preventing Elements Like Salt, Snow & Water From Contacting the Caliper’s Housing & Included Brackets. Every Adaptive One Brake Caliper is Remanufactured Under the Highest Quality Standards to Meet or Exceed the Specifications Required by the Original Design & Tested During the Assembly Process for Leaks, Free Moving Pistons & Smooth Bracket Sliding.
- These remanufactured brake calipers offer everything needed for installation: banjo bolts with new copper crush washers, cable mounting brackets, levers, springs, scrape sensors and pre-lubed components with high-temperature synthetic grease (where applicable).
- E-COATING : Adaptive One’s electrodeposition coating ensures complete protection for both cast iron and aluminum calipers and their critical surfaces
- SLIDES : Slider pins come pre-greased, ensuring proper caliper movement and brake system stability
- FRICTION READY : Indicates that the caliper has all the hardware and components except the brake pads
- MOUNTING BRACKET : All calipers come with the mounting bracket 100% of the time where O.E. designed
- MOUNTING BRACKET THREADS : Chased and inspected
- never worry about cross threading
- PIN BOOTS : New pin boots reduce the chance that moisture and contaminates will cause corrosion, which can affect caliper guide bolts and slide pins
- RUBBER COMPONENTS : All rubber components are 100% replaced, ensuring brakes perform at an optimum level
- BRAKE INLET : Banjo bolts and copper crush washers provided (where applicable) to ensure proper seat on the brake inlet and caliper housing
- PHENOLIC PISTONS : OE specifications matched to ensure proper heat dissipation ** Steel not used as Phenolic substitute
- BLEEDER SCREW : New bleeder screws are used to ensure an airtight seal
Specifications
Pads Included | No |
Pad Wear Sensor Included | No |
Caliper Color | Black |
Caliper Type | Floating |
Color | Black |
Mounting Hardware Included | No |
Sub Brand | Adaptive One |
VMRS Code | 013-017-002 |
Quality Level | Best |
Inlet Type | Banjo Bolt |
Brand | NAPA |
Caliper Piston Material | Phenolic |
Mounting Bracket Included | Yes |
Contents | Includes Brake Pad Installation Hardware w/ Banjo Bolt & Copper Crush Washers - Where Applicable |
Inlet Thread Size | M10-1.0 |
Rust Resistant Coating | Yes |
Contains VOCs | No |
Bleeder Thread Size | 3/8 in - 24 |
New Or Remanufactured | Remanufactured |
SDS Required | No |
Caliper Slides Included | Yes |
Finish | Black Coated |
Casting Material | Cast Iron |
Piston Quantity | Dual Piston |