Fall Is Coming: Up To 20% Off Code
Online Only. Exclusions apply. Ends 9/23
text.skipToNavigation
Molded Heater Hose 5/8" x 5/8" x 16 29/32"
Molded Heater Hose 5/8" x 5/8" x 16 29/32"
Part #:
NBH 10850
Line:
NAPA Belts & Hoses
EMAIL TO YOUR FRIEND
Features & Benefits
Warranty:
Standard : Limited Lifetime Warranty. See Manufacturer's Written Warranty.
Download
Download
WARRANTY INFORMATION
| Warranty Available for Download |
|
Warranty
|
Small I.D. Molded Coolant Hose is factory-molded, OEM-style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
- Has all the quality features of molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- NOTE: NAPA Belts/Hoses recommends replacing hose clamps each time a new coolant hose is installed
- CAUTION: Do not use for fuel or oil transfer applications
Specifications
| Protective Sleeve Included | No |
| I.D. 1 (mm) | 16 mm |
| Mounting Hardware Included | No |
| Overall Length | 16.9 |
| VMRS Code | 042010004 |
| Material | EPDM Rubber |
| Clamp Included | No |
| Quality Level | Best |
| Brand | NAPA |
| Spring Included | No |
| I.D. 1 (in) | .62 in. |
| Inside Diameter | .62 |
| SDS Required | No |
| Hose Steel Coil | No |
