The DPF Thermal Processing Unit Is A Device Which Will Thermally Regenerate A DPF Unit At A Controlled, Pre-programmed Rate. Thermal Regeneration Of DPFs Is Used In Conjunction w/ The 5280 DPF Cleaner & Maximizes The Efficiency Of The Cleaner.
- Sometimes The DPF Cannot Be Regenerated On The Truck Due To A Failure w/ The Vehicles Own Regeneration System Or In The Case Of Retrofit Applications, A Lack Of An On-vehicle Regeneration System.
- Large Chamber Accommodates Various DPF Sizes & Shapes. Front Access Door Allows For Easy Access To The Thermal Chamber. Includes Both Standard Cycle & Pre-heat Cycle For Oil Soaked Filters.
- Internal Chamber Dimensions Are 24" L X 24" W X 26" H
- Designed To Facilitate Cleaning Dirty Filters -especially w/ High Amounts Of Wet Soot & Unburned Hydrocarbons. Pre-programmed Thermal Profile Controls Temperature Ramp-up & Cool Down To Protect DPF From Thermal Shock Reducing Cracking Risk.
- Holds Temperature Constant For Two Hours To Ensure Complete Regeneration Of Filter. Built-in Safety Door Lock & Electronic Door Switch Prevent Unauthorized Opening Of Door When Temps Exceed 200 Deg F.
